Location
Home Mold processing 3D printer accessory mold 3D printer accessory mold 3
Hot search: Injection MoldingPlastic ProcessingInjection MoldPlastic MoldPlastic Injection Mold
Number of mold parting surfaces: Multiple parting surfaces
Scope of application: Home appliances, medical, automotive, electronics, instruments
Mold material: 738H
Processing capacity: 50 per set
Number of cavities: Multi cavity mold
Quality System: iso9001
Customized processing: Yes
High rigidity, high-precision mechanical structure
The main structural components such as the base, column, and saddle are made of high-grade Mihanna cast iron and undergo heat treatment to eliminate internal stress, ensuring the accuracy of micro feed and long-term precision maintenance.
The design of the crossbeam box structure, combined with a stepped track configuration, provides a wide joint span for the saddle, ensuring strong and stable cutting ability of the spindle.
The three-axis roller type precision linear sliding rail design has fast acceleration and deceleration response, with a feed rate of up to 30m/min (H10M).
The three-axis screw adopts precision pre tensioning design, effectively suppressing thermal displacement caused by temperature rise, ensuring the accuracy of positioning and repeatability.
The spindle head adopts a no weight design, without the usual vibration and inertia hysteresis of weight blocks, and the feed response is sensitive, fast, and stable.
Chip screw and oil-water separation design
The workbench is equipped with chip rolling screws on both sides, which can quickly clean chips and reduce chip residue problems.
The base is equipped with an oil-water separation design, and the cutting water tank is equipped with an oil-water separation device, effectively extending the service life of the cutting fluid.
Equipped with cushion plates, carefully selected materials, moderate strength, and not easily deformed.
No cushion plate is installed, and the material is thin and lacks strength, which is prone to deformation.
Equipped with cushion plates, carefully selected materials, moderate strength, and not easily deformed.
No cushion plate is installed, and the material is thin and lacks strength, which is prone to deformation.
The pressure strip is detachable, quenched, and has high strength. It will not deform after prolonged use, causing mold expansion.
The pressure strip is directly welded onto the mold, cannot be disassembled, has not undergone quenching treatment, has low strength, and will deform over time, causing mold expansion.
The pressure strip is detachable, quenched, and has high strength. It will not deform after prolonged use, causing mold expansion.
The pressure strip is directly welded onto the mold, cannot be disassembled, has not undergone quenching treatment, has low strength, and will deform over time, causing mold expansion.
The interface is equipped with positioning, which allows for quick and accurate installation, saving time and effort.
The interface is not equipped with positioning, making installation difficult and prone to misalignment, which affects its use.
The interface is equipped with positioning, which allows for quick and accurate installation, saving time and effort.
The interface is not equipped with positioning, making installation difficult and prone to misalignment, which affects its use.
The slider material is carefully selected, the design is reasonable, and it will not bite to death even after prolonged use.
The slider material is too soft and prone to breakage, and it may bite and die after prolonged use.
The slider material is carefully selected, the design is reasonable, and it will not bite to death even after prolonged use.
The slider material is too soft and prone to breakage, and it may bite and die after prolonged use.
PHONE
86-186 6168 0338
Manager wang
EMALL
wangmiaotian8@163.com
ADDRESS
No. 18 Henan Head Road, Henan Head Community, Jihongtan Street, Qingdao Industrial Park, Shandong Province, China