Location
Home Mold processing Melt blown fabric mold Melt blown fabric mold
Hot search: Injection MoldingPlastic ProcessingInjection MoldPlastic MoldPlastic Injection Mold
The melt blown non-woven fabric process uses high-speed hot air to stretch the polymer solution stream extruded from the nozzle holes of the die, thereby forming ultrafine fibers that aggregate on the drum and rely on self bonding. The die is a key part of the melt blown equipment, and the uniformity of the product is closely related to the die, so high processing accuracy is required.
he spinneret mold is a precision mold, the hole diameter is 0.2-0.4mm, the center distance of the spinneret hole is 0.7-1.0mm, and the spraying polypropylene wire can meet the requirements of medical disposable mask N95 mask.
We can according to your screw extruder model number (45 50 65)Customized meltblow die head, 300, 400, 450, 500, 600, 800, 900, 1000 and other different models.
Cavity polishing finish 0.01-0.03
Suitable for melt-blowing process temperature below 350'C, carbon fiber 330-350'C, PP, PET300'C below.
Equipped with cushion plates, carefully selected materials, moderate strength, and not easily deformed.
No cushion plate is installed, and the material is thin and lacks strength, which is prone to deformation.
Equipped with cushion plates, carefully selected materials, moderate strength, and not easily deformed.
No cushion plate is installed, and the material is thin and lacks strength, which is prone to deformation.
The pressure strip is detachable, quenched, and has high strength. It will not deform after prolonged use, causing mold expansion.
The pressure strip is directly welded onto the mold, cannot be disassembled, has not undergone quenching treatment, has low strength, and will deform over time, causing mold expansion.
The pressure strip is detachable, quenched, and has high strength. It will not deform after prolonged use, causing mold expansion.
The pressure strip is directly welded onto the mold, cannot be disassembled, has not undergone quenching treatment, has low strength, and will deform over time, causing mold expansion.
The interface is equipped with positioning, which allows for quick and accurate installation, saving time and effort.
The interface is not equipped with positioning, making installation difficult and prone to misalignment, which affects its use.
The interface is equipped with positioning, which allows for quick and accurate installation, saving time and effort.
The interface is not equipped with positioning, making installation difficult and prone to misalignment, which affects its use.
The slider material is carefully selected, the design is reasonable, and it will not bite to death even after prolonged use.
The slider material is too soft and prone to breakage, and it may bite and die after prolonged use.
The slider material is carefully selected, the design is reasonable, and it will not bite to death even after prolonged use.
The slider material is too soft and prone to breakage, and it may bite and die after prolonged use.
PHONE
86-186 6168 0338
Manager wang
EMALL
wangmiaotian8@163.com
ADDRESS
No. 18 Henan Head Road, Henan Head Community, Jihongtan Street, Qingdao Industrial Park, Shandong Province, China